Back to Blog
How-to Guides 2026-11-11 Cloud Break Optics 0 views

How to Attach a Camera Quark Adapter for Nikon or Canon

How to Attach a Camera Quark Adapter for Nikon or Canon

Learn how to connect your Daystar QUARK filter to a Nikon or Canon SLR lens using the Camera Quark Adapter for hydrogen-alpha solar viewing.

What the Camera Quark Adapter Does

The Camera Quark Adapter turns your Daystar QUARK hydrogen-alpha solar filter into a solar telescope using an ordinary SLR lens. It connects the QUARK filter to a Nikon or Canon style bayonet mount, allowing you to view or photograph the sun in hydrogen-alpha light. The adapter itself has no electronics; it is a mechanical coupler that lets you use the full range of your lens, including zoom features, without changing your setup.

Before You Start: Compatibility and Requirements

The Camera Quark Adapter requires a Daystar brand QUARK filter. It does not support auto-focus or electronic aperture control, so you will need to focus and set the aperture manually on your lens. Focus and clearances are not guaranteed for 100% of Nikon or Canon style lenses, but the adapter includes an additional focal extender spacer ring to improve compatibility with a wider variety of lenses.

For lenses above 80mm in aperture, Daystar recommends using a red, orange, or yellow colored glass lens front filter (such as Cokin or Hoya) to reduce heat and protect the QUARK filter.

Attaching the Adapter to Your Lens

The following steps assume you have a Daystar QUARK filter and a compatible Nikon or Canon style SLR lens.

  1. Mount the adapter to the lens: Align the bayonet mount on the adapter with the lens mount. Twist until it clicks into place. The Nikon and Canon versions use specific bayonet patterns, so ensure you have the correct version for your lens.
  2. Attach the QUARK filter: Screw or slide the QUARK filter onto the adapter's filter thread. The adapter is designed to conjoin the QUARK filter with the lens securely.
  3. Add the spacer ring if needed: If you experience focus issues, install the included focal extender spacer ring. This ring helps maintain proper back focus for a wider range of lenses.
  4. Mount the assembly on a tripod or telescope mount: The adapter includes a reversible combination lens foot with 1/4-20 tripod holes and a standard Vixen style dovetail mount. Attach the foot to your tripod or mount for stable support.
  5. Set up your viewing or imaging equipment: You can attach a camera body or an eyepiece directly to the QUARK filter. The adapter accepts all universal QUARK accessories, so it can also be used as a telescope with an eyepiece.

Important Safety and Operational Notes

Never point the setup at the sun without a proper solar filter. The QUARK filter is designed for hydrogen-alpha viewing, but the lens front filter recommendation above is an additional safety measure for larger apertures. The adapter does not include any solar safety certification; always follow Daystar's instructions for safe solar observation.

Because the adapter has no electronic pass-through, you will need to control aperture and focus manually. For full-disk viewing, the adapter works best with lenses up to approximately 450mm focal length. Beyond that, you may only see a portion of the solar disk.

Product Specifications

  • CAMERA QUARK Adapter For NIKON: Nikon style bayonet mount for snap-lock mounting to selected lens type. Ensures a secure, repeatable connection between your Nikon lens and the QUARK filter.
    CAMERA QUARK Adapter For NIKON
    CAMERA QUARK Adapter For NIKON
  • CAMERA QUARK Adapter For CANON: Canon style bayonet mount for snap-lock mounting to selected lens type. Provides the same secure connection for Canon lens users.
    CAMERA QUARK Adapter For CANON
    CAMERA QUARK Adapter For CANON
  • CAMERA QUARK Adapter For NIKON: Includes additional focal extender spacer ring to ensure compatibility with a wide variety of lenses. Solves back-focus issues that can occur with certain lenses, making the adapter more versatile.
  • CAMERA QUARK Adapter For NIKON: Daystar recommends use of red, orange or yellow colored glass lens front filters on lenses above 80mm in aperture. Protects the QUARK filter from excessive heat and potential damage when using larger lenses.

Related Articles

Customer Service
Home
Products
Cart
Profile