VLC STL Mount for Lepus-STL/NGC214 (19397)

Description

Variable Length Camera Mounts

NEW! VLC - Variable Length Camera Adapters

Designed for use with Lepus, NextGen, and NGC 214 Telecompressors

The Optec Variable Length Camera Adapters make setting your camera at the perfect back-focus distance quick and simple. Four different models allow you to connect your camera to the Optec Lepus, NextGEN, or NGC 214 telecompressor with a variable back-focus range of 17mm. Each VLC adapter can be adjusted for any distance between 25mm to 42mm. Refer to the back-focus diagram for your NextGEN, NGC, or Lepus telecompressor lens to determine the optimal back-focus distance for your configuration.

#19397  - Designed for use with Lepus and NextGEN Telecompressors

The Optec #19397 Variable Length Cameraadapter makes setting your camera at the perfect back-focus distance quick and simple. With an integrated female STL thread base to fit the Lepus-STL or NGC-214 telecompressor and any camera with a female T-thread interface, the #19395 VLC can set the back-focus from 25 to 42mm. Refer to the back-focus diagram for your Lepus-STL or NGC214 telecompressor lens to determine the optimal back-focus distance.

Each VLC adapter has a precision engraved scale showing the distance in millimeters from the T-thread or STL-thread seat to the base of the adapter. When calculating the back-focus distance for your telecompressor and camera setup, use the engraved scale to set the correct distance remaining after subracting for the camera sensor depth, filter wheel thickness, OAG thickness, etc. Using the included locking ring, sub-millimeter precision can be achieved for setting the camera back-focus to telecompressor distance exactly at the optimum location.

Specifications

Available in four models, the VLC adapters are available with T-thread or STL 2.156"x24tpi thread used in many SBIG, QSI and other cameras. VLC adapters are available to fit the 2.1-inch OPTEC-2100 dovetail on the Lepus or NextGEN telescompressors, or the male STL thread on the camera side of the #19405 Lepus-STL and NGC214 model telecompressors. These Variable Length Camera adapters can be used in place of the fixed length NextGEN and Lepus camera mounting plates, or in combination with the T-thread extenders available from Optec or many other manufacturers.

• #19390: VLC T-thread camera adapter for NextGEN and Lepus telecompressors. 
• #19393: VLC STL thread camera adapter for NextGEN and Lepus telecompressors. 
• #19395: VLC T-thread camera adapter for NGC and Lepus-STL telecompressors. 
• #19397: VLC STL thread camera adapter for NGC and Lepus-STL telecompressors.