NP127is Accessory Package

Overview

This kit for your NP101is comes with:

• Mounting Ring Set for 5" Tube
• 18.2 DeLite Eyepiece
• 2" 90º Everbrite w/2”-1¼” HiHat Adapter

Description

Mounting Ring Set for 5" Tube

Our ring sets provide rigid mounting for astro-imaging with our 4" and 5" scopes. Bottom and top of each ring is drilled for ¼"-20 hardware, have bat-handle locks, and two Tele Vue accessory slots for ring-mounted accessories.

Sets come with a top accessory bar, bottom mounting plate to allow spacing them 5.5" to 6.5" apart. The included bottom plate (BPL-1098) is drilled to mate to a variety of mounts or mounting adapter plates - including the Tele Vue/Vixen Mount Adapter (AVT-1011) and Tele Vue Gibraltar-5 Head. 

For NP127is or any telescope with outside tube diameter of exactly 5-inches.

18.2mm DeLite 62° Apparent Field Eyepiece

Just as Delos eyepieces were developed based on Tele Vue's Ethos eyepiece design advancements, DeLite is the logical step toward a smaller, more economical and lightweight version of Delos.

90° Everbrite Diagonals

Whiter and brighter images. Simply put, that is the benefit the Everbrite mirror coating. This exotic, dielectric, nonmetallic coating is 99% reflective across the full visual spectrum, resulting in the "whitest," most natural image available. The coating is painstakingly applied to Pyrex with a surface accuracy of a 1/10 wave flatness.

To ensure performance, every mirror is optically inspected under conditions far more critical than a diagonal mirror is ever used in typical telescopes. In this way, Tele Vue can guaranty that the Everbrite will permit your telescope to operate at its fullest potential.

The Everbrite is offered in both 1¼" and 2" models. The diagonal bodies of each are machined from solid blocks of aluminum. Permanent alignment is assured. The one piece body construction also means heavy accessories can't force the diagonal body to "unscrew" from the barrel as with other brands. Both the 1¼" and 2" models feature brass clamp rings, anti-reflection threads and 1¼" and 48mm filter threads respectively.