Cloud Break Optics

Flat Pier Plate for 10" ATS and other non-Astro-Physics piers (1612FP)

Flat Pier Plate for 10" ATS and other non-Astro-Physics piers (1612FP) - Main image
$183.23 $251 In stock

Category: Mount Accessories

Description

This Flat Pier Plate (1612FP) has been machined to the specifications of the Advanced Telescope System (ATS) 10" pier.  It is sized to fit directly into the pier without modifications and provide a mounting surface for our 10" Flat Surface Adapter (1612FSA) (previously 1200FSA).  It will add 0.75" to the height of the pier.

Owners of 1100GTO and 900 mounts will be pleased that additional holes have been drilled and tapped for our 8" Flat Surface Adapter (119FSA) (previously 900FSA).  This is of interest to imagers who are looking for the most robust and stable pier for their larger scopes setups. 

The bottom, pier-inserting portion of this plate has additional thickness to allow custom machining in order to fit a smaller inside diameter pier.  Please refer to the PDF schematic for dimensions.

Pier options:

  • Use with the 10" ATS pier (no modification required)
    The base of the 1612FP has already been machined per the specifications provided by ATS to fit into their piers without further modification.
  • Use with other piers (may require custom modification)
    Machine the bottom portion of this plate to fit the I.D. of your pier, if necessary. Please refer to the diagram to determine if your pier is suitable.

Top attachment options:

  • Attach 10" 1612FSA (use existing tapped holes)
  • Attach 8" 119FSA (use existing tapped holes)
  • Attach custom  mount adapter (machine custom tapped holes)

If you intend to attach an 1600GTO or older 1200 mount to the ATS pier, then it is best to choose the combination Flat Surface Adapter with Flat Pier Plate (1612FSA-FP).  It is a two-part adapter that combines both the 1612FSA and the 1612FP. 

Fasteners included:
1/4-20 x 3/4" (8) - attaches 1612FSA or 119FSA to Flat Pier Plate (1612FP)
5/16-18 x 5/8" (6) and washers - attaches 1612FP to ATS pier

Note:  Since the bottom of the flat plate is designed to fit into the 10" ATS Piers, the diameter (9.450") is too small to be used in the Astro-Physics 10" Portable Piers.

Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.8 / 5 · 5 reviews)

Daniel ★★★★★

The bolt pattern lined up perfectly with my ATS pier holes, no re-drilling needed. Solid 1/2-inch plate that feels substantial and doesn't flex at all.

William U. ★★★★★

Machined tolerances are spot on—dropped it into the ATS pier and it seated flush with zero wobble before I even tightened the bolts. The flat surface gives my mount a rock-solid base for imaging sessions. Wish it came with a center hole pre-drilled, but that's a five-minute job with a drill press.

Joshua L. ★★★★★

Machined to fit the ATS 10" pier exactly, this plate slid into place without any filing or shimming. I appreciate the solid, precision feel of the steel construction—it inspires confidence for my imaging setup.