What the GTOCP4 Does for Your GTO Mount
The GTOCP4 is the upgraded control box for all Astro-Physics GTO mounts produced since 1998. It replaces earlier CP2 and CP3 boxes with a faster processor, more memory, and modern connectivity including USB 2.0, Ethernet, and WiFi. This guide walks you through the setup steps that the supplied information confirms, so you can get your mount communicating reliably.
GTOCP4 Key Specifications
- GTOCP4 Control Box for all GTO Mounts (GTOCP4) except Mach2: All new, completely redesigned with modern chip technology resulting in faster processing speed and increased memory capacity for future feature additions. The upgraded processor and memory support floating point calculations and future firmware updates, making the mount more accurate and future-proof.

GTOCP4 Control Box for all GTO Mounts (GTOCP4) except Mach2 - GTOCP4 Control Box for all GTO Mounts (GTOCP4) except Mach2: 12V - 24V DC power. It is compatible with standard automotive or marine batteries. You can power the GTOCP4 from a common 12V battery in the field, which is convenient for remote observing sessions.
- GTOCP4 Control Box for all GTO Mounts (GTOCP4) except Mach2: USB 2.0. Ethernet can be point-to-point w/PC or networked without user configuration. Multiple connection options let you choose the most reliable method for your setup, whether at home or in the field.
Step-by-Step GTOCP4 Setup
The following steps are based on the confirmed features and instructions for the GTOCP4. Always refer to the full manual for your specific mount model.
- 1. Install the FTDI Driver Before Connecting USB: You must install the FTDI VCP driver on your computer BEFORE connecting the GTOCP4 via USB. The driver is available from FTDI Chip's website (select the Windows driver under 'Comments' in the table). This step is critical—without the driver, your computer will not recognize the control box.
- 2. Connect Power: The GTOCP4 accepts 12V to 24V DC power. Use a compatible 12V DC receptacle (2-pin male locking power cable). You will need to purchase a Powerpole Cable designed for this control box; adapters may be required. The mount will not start tracking automatically when power is applied—sidereal rotation does not begin until commanded.
- 3. Choose Your Connection Method: The GTOCP4 supports USB 2.0, Ethernet (point-to-point or networked), WiFi, and two RS-232 ports. For first-time setup, USB is the simplest. If you prefer Ethernet, simply enter the IP address of the GTOCP4 into a web browser to access the built-in Web interface—no special software needed. WiFi can be configured for point-to-point field use or connection to an existing network.
- 4. Configure via the Web Interface: Once connected, use the GTOCP4's built-in Web interface to configure settings. You can turn options on/off, set up Ethernet and WiFi connections, and upload firmware updates. This interface works on any operating system with a web browser.
- 5. Connect Software (APCC or ASCOM Driver): The GTOCP4 works with the Astro-Physics Command Center (APCC) software (Standard or Pro, version 1.5 or later for Ethernet) and the AP V2 ASCOM driver (version 5.20 or later for Ethernet). Connect APCC directly, then use its virtual serial ports for other software. The ASCOM driver continues to work through APCC's virtual ports.
- 6. Test the Safety Slew Logic and Park Function: The GTOCP4 applies Safety Slew logic to all commands, preventing pier crashes. It also includes an Automatic 'Deadman Switch' Safety Timer function that confirms communication with the PC. If the signal is lost, the mount will park at the end of a user-defined countdown. When power is restored, the mount stays parked until you use the Resume from Park function on the keypad.
Important Compatibility Notes
All motor cables used with GTOCP2 or GTOCP3 will plug into the GTOCP4, but upgrades from previous control boxes will require a new cable. The GTOCP4 is backward compatible with all GTO mounts since 1998. If you are upgrading, note that secondary boxes are not utilized—this is a single-box solution. The ruggedized version is rated for extreme temperatures and is dust tight and water resistant.

