Two mounts, two different jobs
The iOptron CEM26EC and the Losmandy AZ8 ALT-AZ Mount are both telescope mounts, but they solve different problems. The CEM26EC is a center-balanced equatorial GoTo mount with motorized tracking and a 26 lb payload rating. The AZ8 is a manual dual-saddle Alt-Azimuth mount with a 35 lb per-side capacity and slow-motion controls on both axes. Choosing between them starts with what you want to do at the eyepiece or camera, not with which mount is “better.”
Payload, weight, and portability
- CEM26EC payload and mount weight: Max payload is 26 lbs (11.8 kg) excluding the counterweight, while the mount head weighs 10 lbs (4.5 kg). The supplied record describes a 2.6 payload-to-mount-weight ratio.
- AZ8 payload and head weight: Instrument weight capacity is 35 lbs per side, and the head weighs 13 lbs. Because it is a dual-saddle design, that per-side rating applies to each telescope position.
- What this means for your setup: If you need to carry one telescope and want a lighter head, the CEM26EC has the lower head weight. If you plan to run two scopes side by side or want extra margin on a single side, the AZ8’s 35 lb per-side rating is the relevant figure. Neither record gives a total assembled weight with tripod, so check that separately if portability is critical.
CEM26EC: GoTo, tracking, and power
- CEM26EC: Max payload of 26 lbs (11.8kg) with the mount weight of only 10 lbs (4.5kg) Sets the practical limit for your optical tube and accessories before you add a counterweight.

CEM26EC - CEM26EC: Precision stepper motor for precise GOTO and accurate tracking Motorized GoTo and tracking are the core reasons to choose this mount over a manual Alt-Az.
- CEM26EC: DC 12V, 5A power; 100V ~ 240V AC adapter included You need a 12V DC supply or the included AC adapter; plan your power source before a session.
- CEM26EC: Built-in Wi-Fi and integrated ST-4 auto guiding port These interfaces matter if you plan to control the mount wirelessly or add guiding for astrophotography.
AZ8: manual control and dual-saddle capacity
- AZ8 ALT-AZ Mount: Instrument Weight Capacity 35 LBS per side; head weight 13 lbs The per-side rating supports two scopes or one heavier scope, and the head weight is the figure to compare for transport.

AZ8 ALT-AZ Mount - AZ8 ALT-AZ Mount: 360 degree slow motion control, both axes; variable slip clutch, both axes Manual slow-motion control lets you track by hand without motors, which suits visual observing.
- AZ8 ALT-AZ Mount: Twin saddle plates; accepts Losmandy D & V series dovetail plates Confirms the dovetail standards the saddles accept, so you can check your telescope’s plate before buying.
- AZ8 ALT-AZ Mount: Constructed of black anodized aluminum with all stainless steel hardware Describes the materials; the record does not state a weather or corrosion rating, so do not assume one.
Tracking and astrophotography: what the records confirm
The CEM26EC record gives a tracking accuracy figure of <0.3 arcsec RMS and lists real-time PEC (RPEC). It also includes an ST-4 auto guiding port and built-in Wi-Fi. Those are the features that make it a candidate for astrophotography. The AZ8 record describes a manual Alt-Az mount with slow-motion controls and setting circles, but it does not list motorized tracking, GoTo, or an autoguiding port. For long-exposure imaging, that difference is central: the AZ8 is a visual-oriented manual mount in the supplied evidence, while the CEM26EC is designed for tracking and GoTo.
Neither record supplies a complete astrophotography workflow, backfocus requirements, or camera compatibility. Treat the CEM26EC’s tracking specification as a mount capability, not a guarantee that every camera and telescope combination will work without additional checks.
Setup and power checks before you order
- Power for the CEM26EC: The mount requires DC 12V, 5A and includes a 100–240V AC adapter. If you plan to run from a battery, confirm your battery can supply 12V at 5A.
- Tripod and support for the AZ8: The AZ8 is offered with LW Tripod, HD Tripod (FHD-MA), MA Only (for piers), or no support. Choose the variant that matches your existing tripod or pier; the record does not confirm compatibility with other supports.
- Counterweight options for the AZ8: Variants include no counterweight option, an AZ8 Light CW System with 5 lb weight (12.5 lb max), or a 1.25" CW Shaft adapter for standard Losmandy weights. The right choice depends on your scope’s weight and balance.
- Dovetail compatibility: The AZ8 accepts Losmandy D and V series dovetail plates. The CEM26EC record lists a 3.8" Vixen-style dovetail saddle. Check your telescope’s dovetail bar against these standards before buying.
Which mount fits your observing style
Choose the CEM26EC if you want motorized GoTo, tracking, and a lighter mount head for a single telescope, especially if astrophotography or guided imaging is on your roadmap. Its 26 lb payload and 12V power requirement set the practical boundaries.
Choose the AZ8 if you prefer manual pointing and slow-motion control, want a dual-saddle mount for two scopes, or need the higher 35 lb per-side capacity. It is a manual Alt-Az mount in the supplied record, so plan to track by hand.
The records do not confirm Wi-Fi, GoTo, or autoguiding for the AZ8, and they do not confirm dual-saddle capacity for the CEM26EC. Those absences are decision points, not defects; they simply mean each mount is built for a different use.


