Back to Blog
Buying Guides 2026-11-14 Cloud Break Optics 0 views

Baader ASSF Solar Filter: Sizing It for Scopes and Lenses

Baader ASSF Solar Filter: Sizing It for Scopes and Lenses

A practical guide to choosing the Baader ASSF solar filter size for your telescope, spotting scope, or camera lens, with mounting checks and safety details.

Start With Your Tube Diameter, Not the Filter Number

The Baader ASSF solar filter is a white-light filter that fits over the front of a telescope, spotting scope, or camera lens. The most important step is matching the filter's clamping range to your instrument's outer tube diameter. The ASSF uses three centering bolts to grip the tube, and the available sizes are 130mm and 150mm. For other diameters, Baader provides an interactive Solar Filter Finder tool and a clamping range chart. Do not guess; measure your tube's outside diameter with calipers and compare it to the published range for each size.

If you plan to observe at magnifications above 120x, Baader recommends the ASTF filters instead of the ASSF. The ASSF is designed for lower-power, wider-field views of the Sun, making it a good match for spotting scopes and short focal-length telescopes used at moderate magnifications.

What the ASSF Includes for Mounting

Mounting the Filter Safely

The ASSF mounts without tools. You adjust the centering bolts to fit your tube, then tighten the integrated Phillips screws with a screwdriver if you prefer a more permanent setting. The aluminum sliding fasteners have an index scale beside each slot, so you can repeat the same adjustment when moving the filter between instruments. The bolts have rubber grip faces that slide onto the tube but hold firmly once tightened.

Always use the supplied safety straps. Attach the adhesive pads to your tube and secure the filter with the Velcro straps. This prevents the filter from being knocked off or blown away. The filter cell also has a clear white IR-rejecting front ring with raised edges that protect the AstroSolar film from contact with sharp metal. A warning is printed on the front: read the instructions before use.

Key Specifications at a Glance

Sizing for Spotting Scopes and Camera Lenses

Spotting scopes often have tapered or stepped tubes, so measure the outside diameter at the very front where the filter will clamp. The ASSF's centering bolts can accommodate some variation, but the filter must sit squarely and securely. For camera lenses, the same rule applies: measure the filter thread or the outer barrel diameter, depending on how the ASSF is intended to mount. The supplied information does not specify a thread size, so the ASSF is not confirmed to screw onto lens threads; it appears to clamp around the outside of the lens barrel. If you need a thread-mounted filter, check with us before ordering.

For very small lenses or finder scopes, the ASSF may not have a small enough clamping range. Baader's Solar Filter Finder tool can help identify the correct model. The ASSF is available in 130mm and 150mm sizes, and other sizes may be available through the finder tool.

What the Supplied Information Does Not Confirm

The catalog does not list a specific clamping range for each ASSF size, so you must rely on Baader's published chart or the interactive finder. It also does not confirm whether the ASSF can be used with lens threads or only with cylindrical tubes. The instructions for use are included in the box, but the catalog does not reproduce them; follow the printed instructions exactly. Finally, the ASSF is not recommended for magnifications above 120x; for those powers, choose an ASTF filter instead.

Related Articles

Customer Service
Home
Products
Cart
Profile